Features:

• Detectors can be mounted horizontally, vertically or at any angle. The self-checking C7012E,F models require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.
• Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.
• Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• A swivel mount is available to facilitate flame sighting.
• Incorporate UV sensor tube checking feature; used with Honeywell Dynamic Self-Check (R7247C, R7847C)
• Flame Signal Amplifiers.
• Housing meets NEMA 4 enclosure standards (indoor, outdoor protection: rain-tight, dust-tight, hose-directed watertight).
• Protective heat block built into mounting flange.
• High pressure 50 psi (345 kPa) quartz viewing window, focusing lens, swivel mount and antivibration mounting accessories available.

Product Specifications:

• C7012E Self-Checking Solid State Purple Peeper® Ultraviolet Flame Detector: For use with R7247C, and R7847C Dynamic Self-Check Amplifiers.
• Voltage: 12E: Separate models for 100, 120, 208, or 240 Vac, all 50/60 Hz; also models for 110 or 220 volts, 50 Hz only..
• Power Consumption: 7.0 watts maximum
• Operating Temperature: -20°F to 175°F (-29°C to 79°C)
• Storage Temperature Ratings: -60°F to 175°F (-51°C to 79°C).
• Pressure Rating Of Quartz Viewing Window:
  • 20 psi (138 kPa). Focusing lens: 
  • 20 psi (138 kPa) rating or high pressure viewing window
  • 50 psi (345 kPa) rating available; see Accessories section
• Mounting flange with either 3/4 or 1 inch NPT internal threads (depending on model) for attaching to sight pipe.
• Wiring Connections:
  • NEC Class 1 Color-Coded Leadwires:
    • Length: 8 feet (2.4 meters).
    • Number of Leadwires: 6.
• Threaded Leadwire Opening in Faceplate: 1/2-14 NPSM internal threads for attaching conduit.
• Weight: Approximately 4.25 pounds (1.9 kg).
• SIL 3 Capable: The C7012E or F when used with a R7847C self-check amplifier in Relay Module EC7810A, 20A, 30A, 40L, 50A; RM7800[E,G,L,M], 30A, 38[A,B,C], 40[E,G,L,M] 50A, 90[A,B,C,D], 97[A,C], 98A is SIL 3 Capable in a properly designed Safety Instrumented System. See form number 650312 for Certificate Agreement.
• Underwriters Laboratories Inc. Listed (120 Volt Models Only): File no. MP268.