FEATURES:

• Replaces M934A,D, M941, M944A,C,D, M945A,D,F, M954, M965, and M975 motors. 
• Integral junction box provides NEMA 3 weather protection. 
• Integral spring return returns motor to normal position when power is interrupted. 
• Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer. 
• Quick-connect terminals are standard—screw terminal adapter is available. 
• Adapter bracket for matching shaft height of older motors is available. 
• Motors have field adjustable stroke (90° to 160°).
• Die-cast aluminum housing.
• Integral auxiliary switches are available factory  mounted, or can be field added.
• Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available.
• Spring return motors can operate valve linkages form power end or auxiliary end shafts for normally closed or normally open valve applications. 
• All models have dual shafts (slotted and tapped on both ends). 
• All models have auxiliary switch cams.
• Fixed torque throughout the entire voltage range.
• Motors are designed for either normally open or normally closed valves and dampers. 
• Field addable interface modules can be mounted in the junction box to upgrade the motor to Series 70 (electronic) control. 

SPECIFICATIONS:

• Power Consumption: 15VA
• Inputs: Proportional, Series 90. Motor Series 90 control can be either Electronic, or Mechanical (135ohm). 
• Ambient Temperature Ratings:
  • Maximum: 150° F (66° C) at 25% duty cycle. 
  • Minimum: -40° F (-40° C). 
• Dead Weight Load On Shaft:
  • Power or Auxiliary End: 200 lb (90.8 kg) maximum.
  • Maximum Combined Load: 300 lb (136 kg). (Dual shaft motors only.) 
• Crankshaft: 3/8 in. (9.5 mm) square
• Approvals: Underwriters Laboratories Inc. Listed: File No. E4436, Guide No. XAPX to US and Canadian standards.